//==========================================================================//
//   Flowsquare+ parameter file...              -- 2021R1.0 --                //
//--------------------------------------------------------------------------//
//   You may directly edit this file, but follow below rules. Each          //
//   parameter entry consists of three blocks divided by [SPACE] or         //
//   double-slash(//). The order of these entries can be arbitorary.        //
//   Example:                                                               //
//   003:name     0.00123456789   // some explanation of the parameter      //
//   ^^^^^^^^^    ^^^^^^^^^^^^^     ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^     //
//   1st block      2nd block          3rd block starts after (//).         //
//==========================================================================//
----- General Parameters ----------------------------------------------------------------------------------

002:cmode                                   0  // Simulation mode. [0] Fluid simulation mode (constant density and temperature, suitable for gas and liquid single-phase flows). [1] Thermo-fluid simulation mode (variable density and temperature, suitable for gas phase flows).
003:ageFlag                                 1  // Whether or not including the age variable in the simulation.
004:parallel                                2  // Level of parallelism. [0] Serial (no parallelism). [1] Two, parallelism=2. [2] Low, max(2, maxThreadsAvail/4). [3] Medium, max(2, maxThreadsAvail/2). [4] High, max(2, maxThreadsAvail).
005:domx                                 1400  // Nominal screen size (horizontal) during simulations. (unit: pixels)
006:nx                                    300  // Number of mesh points in x-direction. This number may be set independent from physical domain dimensions.
007:ny                                    180  // Number of mesh points in y-direction. This number may be set independent from physical domain dimensions.
008:lx                                    3.5  // Physical domain size in x-direction. (unit: m)
009:ly                                    2.1  // Physical domain size in y-direction. (unit: m)
010:sts                                     0  // Start time step. A new simulation starts from sts=0. To restart, sts should be a timestep at which dump data was output in the previous simulation.
011:latts                              100000  // End time step. For simulations under a trial license, this is limitted.
012:nfig                                10000  // Interval time step for image output. Result images are saved in the 'image' directory once in every 'nfig' time steps. Setting zero value disable image output.
013:nfile                               10000  // Interval time step for dump data output. Result dump data are saved in the 'dump' directory once in every 'nfile' time steps. Setting zero value disable dump output.
----- Boundary and Initial Conditions --------------------------------------------------------------------

015:presW                             1.0E+05  // Mean pressure. Atmospheric pressure is 1.013E+5 (Pa). (unit: Pa)
016:uinB                                  0.0  // X-velocity component for the BLUE inflow boundry. If the value is set as '-', this boundary is slip boundary in x-direction. (unit: m/s)
017:vinB                                  1.0  // Y-velocity component for the BLUE inflow boundry. If the value is set as '-', this boundary is slip boundary in y-direction. (unit: m/s)
018:uinY                                    -  // X-velocity component for the YELLOW inflow boundry. If the value is set as '-', this  boundary is slip boundary in x-direction. (unit: m/s)
019:vinY                                    -  // Y-velocity component for the YELLOW inflow boundry. If the value is set as '-', this  boundary is slip boundary in y-direction. (unit: m/s)
----- Physical and Model Parameters ------------------------------------------------------------------------

021:mu                                 1.8E-5  // Dynamic viscosity of the fluid. mu is approximately 1.8E-5 (kg/m/s) for the atmospheric air at 15~25 (deg.C). For water at 20 (deg.C), mu is 1.0E-3 (kg/m/s). (unit: kg/m/s)
----- Graphics & Visualization Parameters ------------------------------------------------------------------

023:ndiv                                   16  // Interval mesh points between displayed visualization related objects such as vectors, streamlines and particles.
#End of file